GATE Syllabus of All Subjects
#1
GATE Syllabus

GATE Syllabus for Aerospace Engineering -AE

Engineering Mathematics
Linear Algebra: Matrix algebra, systems of linear equations, eigen values and eigen vectors.

Calculus:Functions of single variable, limit, continuity and differentiability, mean value theorems, evaluation of definite and improper integrals, partial derivatives, total derivative, maxima and minima, gradient, divergence and curl, vector identities, directional derivatives, line, surface and volume integrals. Theorems of Stokes, Gauss and Green.

Differential Calculus:First order linear and nonlinear equations, higher order linear ODEs with constant coefficients, Cauchy and Euler equations, initial and boundary value problems, Laplace transforms. Partial differential equations and separation of variables methods.

Numerical methods:Numerical solution of linear and nonlinear algebraic equations, integration by trapezoidal and Simpson rule, single and multi-step methods for differential equations.
Flight Mechanics
Atmosphere:Properties, standard atmosphere. Classification of aircraft. Airplane (fixed wing aircraft) configuration and various parts.

Airplane performance: Pressure altitude; equivalent, calibrated, indicated air speeds; Primary flight instruments: Altimeter, ASI, VSI, Turn-bank indicator. Drag polar; take off and landing; steady climb & descent,-absolute and service ceiling; cruise, cruise climb, endurance or loiter; load factor, turning flight, V-n diagram; Winds: head, tail & cross winds.

Static stability: Angle of attack, sideslip; roll, pitch & yaw controls; longitudinal stick fixed & free stability, horizontal tail position and size; directional stability, vertical tail position and size; dihedral stability. Wing dihedral, sweep & position; hinge moments, stick forces.

Dynamic stability: Euler angles; Equations of motion; aerodynamic forces and moments, stability & control derivatives; decoupling of longitudinal and lat-directional dynamics; longitudinal modes; lateral-directional modes.

Space Dynamics
Central force motion, determination of trajectory and orbital period in simple cases. Orbit transfer, in-plane and out-of-plane. Elements of rocket motor performance.
Aerodynamics
Basic Fluid Mechanics: Incompressible irrotational flow, Helmholtz and Kelvin theorem, singularities and superposition, viscous flows, boundary layer on a flat plate.

Airfoils and wings:Classification of airfoils, aerodynamic characteristics, high lift devices, Kutta Joukowski theorem; lift generation; thin airfoil theory; wing theory; induced drag; qualitative treatment of low aspect ratio wings.

Viscous Flows:Flow separation, introduction to turbulence, transition, structure of a turbulent boundary layer.

Compressible Flows:Dynamics and Thermodynamics of I-D flow, isentropic flow, normal shock, oblique shock, Prandtl-Meyer flow, flow in nozzles and diffusers, inviscid flow in a c-d nozzle, flow in diffusers. subsonic and supersonic airfoils, compressibility effects on lift and drag, critical and drag divergence Mach number, wave drag.

Wind Tunnel Testing:Measurement and visualisation techniques.
Structures
Stress and Strain:Equations of equilibrium, constitutive law, strain-displacement relationship, compatibility equations, plane stress and strain, Airy's stress function.

Flight Vehicle Structures:Characteristics of aircraft structures and materials, torsion, bending and flexural shear. Flexural shear flow in thin-walled sections. Buckling. Failure theories. Loads on aircraft.

Structural Dynamics:Free and forced vibration of discrete systems. Damping and resonance. Dynamics of continuous systems.
Propulsion
Thermodynamics of Aircraft Gas Turbine engines, thrust and thrust augmentation.

Turbomachinery:Axial compressors and turbines, centrifugal pumps and compressors.

Aerothermodynamics of non rotating propulsion components:Intakes, combustor and nozzle. Thermodynamics of ramjets and scramjets. Elements of rocket propulsion.


GATE Syllabus for Agricultural Engineering - AG

Engineering Mathematics

Linear Algebra: Matrices and Determinants, Systems of linear equations, Eigen values and eigen vectors.



Calculus: Limit, continuity and differentiability; Partial Derivatives; Maxima and minima; Sequences and series; Test for convergence; Fourier series.



Vector Calculus: Gradient; Divergence and Curl; Line; surface and volume integrals; Stokes, Gauss and Green's theorems.



Differential Equations: Linear and non-linear first order ODEs; Higher order linear ODEs with constant coefficients; Cauchy's and Euler's equations; Laplace transforms; PDEs - Laplace, heat and wave equations.



Probability and Statistics: Mean, median, mode and standard deviation; Random variables; Poisson, normal and binomial distributions; Correlation and regression analysis.



Numerical Methods: Solutions of linear and non-linear algebraic equations; integration of trapezoidal and Simpson's rule; single and multi-step methods for differential equations.


Farm Machinery and Power

Sources of power on the farm-human, animal, mechanical, electrical, wind, solar and biomass; bio-fuels; design and selection of machine elements - gears, pulleys, chains and sprockets and belts; overload safety devices used in farm machinery; measurement of force, torque, speed, displacement and acceleration on machine elements.



Soil tillage; forces acting on a tillage tool; hitch systems and hitching of tillage implements; mechanics of animal traction; functional requirements, principles of working, construction and operation of manual, animal and power operated equipment for tillage, sowing, planting, fertilizer application, inter-cultivation, spraying, mowing, chaff cutting, harvesting, threshing and transport; testing of agricultural machinery and equipment; calculation of performance parameters -field capacity, efficiency, application rate and losses; cost analysis of implements and tractors



Thermodynamic principles of I.C. engines; I.C. engine cycles; engine components; fuels and combustion; lubricants and their properties; I.C. engine systems - fuel, cooling, lubrication, ignition, electrical, intake and exhaust; selection, operation, maintenance and repair of I.C. engines; power efficiencies and measurement; calculation of power, torque, fuel consumption, heat load and power losses.



Tractors and power tillers - type, selection, maintenance and repair; tractor clutches and brakes; power transmission systems - gear trains, differential, final drives and power take-off; mechanics of tractor chassis; traction theory; three point hitches- free link and restrained link operations; mechanical steering and hydraulic control systems used in tractors; human engineering and safety in tractor design; tractor tests and performance.


Soil and Water Conservation Engineering

Ideal and real fluids, properties of fluids; hydrostatic pressure and its measurement; hydrostatic forces on plane and curved surface; continuity equation; Bernoulli's theorem; laminar and turbulent flow in pipes, Darcy- Weisbach and Hazen-Williams equations, Moody's diagram; flow through orifices and notches; flow in open channels.



Engineering properties of soils; fundamental definitions and relationships; index properties of soils; permeability and seepage analysis; shear strength, Mohr's circle of stress, active and passive earth pressures; stability of slopes.



Hydrological cycle; meteorological parameters and their measurement, analysis of precipitation data; abstraction from precipitation; runoff; hydrograph analysis, unit hydrograph theory and application; stream flow measurement; flood routing, hydrological reservoir and channel routing.



Measurement of distance and area; chain surveying, methods of traversing; measurement of angles and bearings, plane table surveying; types of levelling; contouring; instruments for surveying and levelling; computation of earth work.



Mechanics of soil erosion, soil erosion types; wind and water erosion; factors affecting erosion; soil loss estimation; biological and engineering measures to control erosion; terraces and bunds; vegetative waterways; gully control structures, drop, drop inlet and chute spillways; earthen dams; water harvesting structures, farm ponds, watershed management.



Soil-water-plant relationship, water requirement of crops; consumptive use and evapotranspiration; irrigation scheduling; irrigation efficiencies; design of irrigation channels; measurement of soil moisture, irrigation water and infiltration; surface, sprinkler and drip methods of irrigation; design and evaluation of irrigation methods.



Drainage coefficient; planning, design and layout of surface and sub-surface drainage systems; leaching requirement and salinity control; irrigation and drainage water quality.



Groundwater occurrence confined and unconfined aquifers, evaluation of aquifer properties; well hydraulics; groundwater recharge.



Classification of pumps; pump characteristics; pump selection and installation.


Agricultural Processing and Food Engineering

Steady state heat transfer in conduction, convection and radiation; transient heat transfer in simple geometry; condensation and boiling heat transfer; working principles of heat exchangers; diffusive and convective mass transfer; simultaneous heat and mass transfer in agricultural processing operations.



Material and energy balances in food processing systems; water activity, sorption and desorption isotherms; centrifugal separation of solids, liquids and gases; kinetics of microbial death - pasteurization and sterilization of liquid foods; preservation of food by cooling and freezing; refrigeration and cold storage basics and applications; psychrometry - properties of air-vapour mixture; concentration and drying of liquid foods - evaporators, tray, drum and spray dryers.

Mechanics and energy requirement in size reduction of granular solids; particle size analysis for comminuted solids; size separation by screening; fluidization of granular solids-pneumatic, bucket, screw and belt conveying; cleaning and grading; Effectiveness of grain cleaners.



Hydrothermal treatment, drying and milling of cereals, pulses and oilseeds; Processing of seeds, spices, fruits and vegetables; By-product utilization from processing industries.



Controlled and modified atmosphere storage; Perishable food storage, godowns, bins and grain silos.


GATE Syllabus for Architecture and Planning -AR

City planning: Evolution of cities; principles of city planning; types of cities & new towns; planning regulations and building byelaws; eco-city concept; sustainable development.



Housing: Concept of housing; neighbourhood concept; site planning principles; housing typology; housing standards; housing infrastructure; housing policies, finance and management; housing programs in India; self help housing.



Landscape Design: Principles of landscape design and site planning; history of landscape styles; landscape elements and materials; plant characteristics & planting design; environmental considerations in landscape planning.



Computer Aided Design: Application of computers in architecture and planning; understanding elements of hardware and software; computer graphics; programming languages C and Visual Basic and usage of packages such as AutoCAD, 3D-Studio, 3D Max.



Environmental Studies in Building Science: Components of Ecosystem; ecological principles concerning environment; climate responsive design; energy efficient building design; thermal comfort; solar architecture; principles of lighting and styles for illumination; basic principles of architectural acoustics; environment pollution, their control & abatement.



Visual and Urban Design: Principles of visual composition; proportion, scale, rhythm, symmetry, harmony, datum, balance, form, colour, texture; sense of place and space, division of space; barrier free design; focal point, vista, image ability, visual survey, figure-background relationship.



History of Architecture: Indian Indus valley, Vedic, Buddhist, Indo-Aryan, Dravidian and Mughal periods; European Egyptian, Greek, Roman, medieval and renaissance periods- construction and architectural styles; vernacular and traditional architecture.



Development of Contemporary Architecture: Architectural developments and impacts on society since industrial revolution; influence of modern art on architecture; works of national and international architects; art novuea, eclecticism, international styles, post modernism, deconstruction in architecture.



Building Services: Water supply, sewerage and drainage systems; sanitary fittings and fixtures; plumbing systems, principles of internal & external drainage systems, principles of electrification of buildings, intelligent buildings; elevators & escalators, their standards and uses; air-conditioning systems; fire fighting systems, building safety and security systems.



Building Construction and Management: Building construction techniques, methods and details; building systems and prefabrication of building elements; principles of modular coordination; estimation, specification, valuation, professional practice; project management techniques e.g., PERT, CPM etc;



Materials and Structural Systems: Behavioural characteristics of all types of building materials e.g. mud, timber, bamboo, brick, concrete, steel, glass, FRP, different polymers, composites; principles of strength of materials; design of structural elements in wood, steel and RCC; elastic and limit state design; complex structural systems; principles of pre-stressing; tall buildings; principles of disaster resistant structures.



Planning Theory: Regional planning; settlement system planning; history of human settlements; growth of cities & metropolises; principles of Ekistics; rural-urban migration; urban conservation; urban renewal; Five-year plan; structural and sectoral plan.



Techniques of Planning: Planning survey techniques; preparation of urban and regional structure plans, development plans, action plans; site planning principles and design; statistical methods of data analysis; application of G.I.S and remote sensing techniques in urban and regional planning; decision making models.



Traffic and Transportation Planning: Principles of traffic engineering and transportation planning; traffic survey methods; design of roads, intersections, grade separators and parking areas; hierarchy of roads and levels of services; traffic and transport management in urban areas, intelligent transportation system; mass transportation planning; para-transits and other modes of transportation, pedestrian & slow moving traffic planning.



Infrastructure, Services and Amenities: Principles of water supply and sanitation systems; water treatment; solid waste disposal systems; waste treatment, recycle & reuse; urban rainwater harvesting; power supply and communication systems --- network, design & guidelines; demography related standards at various levels of the settlements for health, education, recreation, religious & public-semi public facilities.



Development Administration and Management: Planning laws; development control and zoning regulations; laws relating to land acquisition; development enforcements, urban land ceiling; land management techniques; planning and municipal administration; disaster mitigation management; 73rd & 74th Constitutional amendments; valuation & taxation; revenue resources and fiscal management; public participation and role of NGO & CBO; Institutional networking & capacity building.


GATE 2011 Syllabus for Biotechnology
Linear Algebra: Matrices and determinants, Systems of linear equations, Eigen values and Eigen vectors.

Calculus: Limit, continuity and differentiability, Partial derivatives, Maxima and minima, Sequences and series, Test for convergence, Fourier Series.

Differential Equations: Linear and nonlinear first order ODEs, higher order ODEs with constant coefficients, Cauchy’s and Euler’s equations, Laplace transforms, PDE- Laplace, heat and wave equations.

Probability and Statistics: Mean, median, mode and standard deviation, Random variables, Poisson, normal and binomial distributions, Correlation and regression analysis.

Numerical Methods: Solution of linear and nonlinear algebraic equations, Integration of trapezoidal and Simpson’s rule, Single and multistep methods for differential equations.


Microbiology: Prokaryotic and eukaryotic cell structure; Microbial nutrition, growth and control; Microbial metabolism (aerobic and anaerobic respiration, photosynthesis); Nitrogen fixation; Chemical basis of mutations and mutagens; Microbial genetics (plasmids, transformation, transduction, conjugation); Microbial diversity and characteristic features; Viruses.

Biochemistry: Biomolecules and their conformation; Ramachandran map; Weak inter-molecular interactions in biomacromolecules; Chemical and functional nature of enzymes; Kinetics of single substrate and bi-substrate enzyme catalyzed reactions; Bioenergetics; Metabolism (Glycolysis, TCA and Oxidative phosphorylation); Membrane transport and pumps; Cell cycle and cell growth control; Cell signaling and signal transduction; Biochemical and biophysical techniques for macromolecular analysis.

Molecular Biology and Genetics: Molecular structure of genes and chromosomes; DNA replication and control; Transcription and its control; Translational processes; Regulatory controls in prokaryotes and eukaryotes; Mendelian inheritance; Gene interaction; Complementation; Linkage, recombination and chromosome mapping; Extrachromosomal inheritance; Chromosomal variation; Population genetics; Transposable elements, Molecular basis of genetic diseases and applications.

Process Biotechnology: Bioprocess technology for the production of cell biomass and primary/secondary metabolites, such as baker’s yeast, ethanol, citric acid, amino acids, exo-polysacharides, antibiotics and pigments etc.; Microbial production, purification and bioprocess application(s) of industrial enzymes; Production and purification of recombinant proteins on a large scale; Chromatographic and membrane based bioseparation methods; Immobilization of enzymes and cells and their application for bioconversion processes. Aerobic and anaerobic biological processes for stabilization of solid / liquid wastes; Bioremediation.

Bioprocess Engineering: Kinetics of microbial growth, substrate utilization and product formation; Simple structured models; Sterilization of air and media; Batch, fed-batch and continuous processes; Aeration and agitation; Mass transfer in bioreactors; Rheology of fermentation fluids; Scale-up concepts; Design of fermentation media; Various types of microbial and enzyme reactors; Instrumentation in bioreactors.

Plant and Animal Biotechnology: Special features and organization of plant cells; Totipotency; Regeneration of plants; Plant products of industrial importance; Biochemistry of major metabolic pathways and products; Autotrophic and heterotrophic growth; Plant growth regulators and elicitors; Cell suspension culture development: methodology, kinetics of growth and production formation, nutrient optimization; Production of secondary metabolites by plant suspension cultures; Hairy root cultures and their cultivation. Techniques in raising transgencies.

Characteristics of animal cells: Metabolism, regulation and nutritional requirements for mass cultivation of animal cell cultures; Kinetics of cell growth and product formation and effect of shear force; Product and substrate transport; Micro & macro-carrier culture; Hybridoma technology; Live stock improvement; Cloning in animals; Genetic engineering in animal cell culture; Animal cell preservation.

Immunology: The origin of immunology; Inherent immunity; Humoral and cell mediated immunity; Primary and secondary lymphoid organ; Antigen; B and T cells and Macrophages; Major histocompatibility complex (MHC); Antigen processing and presentation; Synthesis of antibody and secretion; Molecular basis of antibody diversity; Polyclonal and monoclonal antibody; Complement; Antigen-antibody reaction; Regulation of immune response; Immune tolerance; Hyper sensitivity; Autoimmunity; Graft versus host reaction.

Recombinant DNA Technology: Restriction and modification enzymes; Vectors: plasmid, bacteriophage and other viral vectors, cosmids, Ti plasmid, yeast artificial chromosome; cDNA and genomic DNA library; Gene isolation; Gene cloning; Expression of cloned gene; Transposons and gene targeting; DNA labeling; DNA sequencing; Polymerase chain reactions; DNA fingerprinting; Southern and northern blotting; In-situ hybridization; RAPD; RFLP; Site-directed mutagenesis; Gene transfer technologies; Gene therapy.

Bioinformatics: Major bioinformatics resources (NCBI, EBI, ExPASy); Sequence and structure databases; Sequence analysis (biomolecular sequence file formats, scoring matrices, sequence alignment, phylogeny); Genomics and Proteomics (Large scale genome sequencing strategies; Comparative genomics; Understanding DNA microarrays and protein arrays); Molecular modeling and simulations (basic concepts including concept of force fields).



GATE Syllabus for Civil Engineering - CE

Engineering Mathematics

Linear Algebra: Matrix algebra, Systems of linear equations, Eigen values and eigenvectors.

Calculus: Functions of single variable, Limit, continuity and differentiability, Mean value theorems, Evaluation of definite and improper integrals, Partial derivatives, Total derivative, Maxima and minima, Gradient, Divergence and Curl, Vector identities, Directional derivatives, Line, Surface and Volume integrals, Stokes, Gauss and Green's theorems.

Differential equations: First order equations (linear and nonlinear), Higher order linear differential equations with constant coefficients, Cauchy's and Euler's equations, Initial and boundary value problems, Laplace transforms, Solutions of one dimensional heat and wave equations and Laplace equation.

Complex variables: Analytic functions, Cauchy's integral theorem, Taylor and Laurent series.

Probability and Statistics: Definitions of probability and sampling theorems, Conditional probability, Mean, median, mode and standard deviation, Random variables, Poisson, Normal and Binomial distributions.

Numerical Methods: Numerical solutions of linear and non-linear algebraic equations Integration by trapezoidal and Simpson's rule, single and multi-step methods for differential equations.
Structural Engineering

Mechanics: Bending moment and shear force in statically determinate beams. Simple stress and strain relationship: Stress and strain in two dimensions, principal stresses, stress transformation, Mohr's circle. Simple bending theory, flexural and shear stresses, unsymmetrical bending, shear centre. Thin walled pressure vessels, uniform torsion, buckling of column, combined and direct bending stresses.

Structural Analysis:Analysis of statically determinate trusses, arches, beams, cables and frames, displacements in statically determinate structures and analysis of statically indeterminate structures by force/ energy methods, analysis by displacement methods (slope deflection and moment distribution methods), influence lines for determinate and indeterminate structures. Basic concepts of matrix methods of structural analysis.

Concrete Structures: Concrete Technology- properties of concrete, basics of mix design. Concrete design- basic working stress and limit state design concepts, analysis of ultimate load capacity and design of members subjected to flexure, shear, compression and torsion by limit state methods. Basic elements of prestressed concrete, analysis of beam sections at transfer and service loads.

Steel Structures: Analysis and design of tension and compression members, beams and beam- columns, column bases. Connections- simple and eccentric, beam'column connections, plate girders and trusses. Plastic analysis of beams and frames.
Geotechnical Engineering

Soil Mechanics:Origin of soils, soil classification, three-phase system, fundamental definitions, relationship and interrelationships, permeability & seepage, effective stress principle, consolidation, compaction, shear strength.

Foundation Engineering: Sub-surface investigations- scope, drilling bore holes, sampling, penetration tests, plate load test. Earth pressure theories, effect of water table, layered soils. Stability of slopes-infinite slopes, finite slopes. Foundation types-foundation design requirements. Shallow foundations-bearing capacity, effect of shape, water table and other factors, stress distribution, settlement analysis in sands & clays. Deep foundations pile types, dynamic & static formulae, load capacity of piles in sands & clays, negative skin friction.
Water Resources Engineering

Fluid Mechanics and Hydraulics: Properties of fluids, principle of conservation of mass, momentum, energy and corresponding equations, potential flow, applications of momentum and Bernoulli's equation, laminar and turbulent flow, flow in pipes, pipe networks. Concept of boundary layer and its growth. Uniform flow, critical flow and gradually varied flow in channels, specific energy concept, hydraulic jump. Forces on immersed bodies, flow measurements in channels, tanks and pipes. Dimensional analysis and hydraulic modeling. Kinematics of flow, velocity triangles and specific speed of pumps and turbines.

Hydrology: Hydrologic cycle, rainfall, evaporation, infiltration, stage discharge relationships, unit hydrographs, flood estimation, reservoir capacity, reservoir and channel routing. Well hydraulics.

Irrigation: Duty, delta, estimation of evapo-transpiration. Crop water requirements. Design of: lined and unlined canals, waterways, head works, gravity dams and spillways. Design of weirs on permeable foundation. Types of irrigation system, irrigation methods. Water logging and drainage, sodic soils.
Environmental Engineering

Water requirements: Quality standards, basic unit processes and operations for water treatment. Drinking water standards, water requirements, basic unit operations and unit processes for surface water treatment, distribution of water. Sewage and sewerage treatment, quantity and characteristics of wastewater. Primary, secondary and tertiary treatment of wastewater, sludge disposal, effluent discharge standards. Domestic wastewater treatment, quantity of characteristics of domestic wastewater, primary and secondary treatment Unit operations and unit processes of domestic wastewater, sludge disposal.

Air Pollution: Types of pollutants, their sources and impacts, air pollution meteorology, air pollution control, air quality standards and limits.

Municipal Solid Wastes: Characteristics, generation, collection and transportation of solid wastes, engineered systems for solid waste management (reuse/ recycle, energy recovery, treatment and disposal).

Noise Pollution: Impacts of noise, permissible limits of noise pollution, measurement of noise and control of noise pollution.
Transportation Engineering

Highway Planning: Geometric design of highways, testing and specifications of paving materials, design of flexible and rigid pavements.

Traffic Engineering: Traffic characteristics, theory of traffic flow, intersection design, traffic signs and signal design, highway capacity.
Surveying

Importance of surveying, principles and classifications, mapping concepts, coordinate system, map projections, measurements of distance and directions, leveling, theodolite traversing, plane table surveying, errors and adjustments, curves.


GATE Syllabus for Chemical Engineering - CH

Engineering Mathematics

Linear Algebra: Matrix algebra, Systems of linear equations, Eigen values and eigenvectors.

Calculus: Functions of single variable, Limit, continuity and differentiability, Mean value theorems, Evaluation

of definite and improper integrals, Partial derivatives, Total derivative, Maxima and minima, Gradient, Divergence and Curl, Vector dentities, Directional derivatives, Line, Surface and Volume integrals, Stokes, Gauss and Green's theorems.

Differential equations: First order equations (linear and nonlinear), Higher order linear differential equations with constant coefficients, Cauchy's and Euler's equations, Initial and boundary value problems, Laplace transforms, Solutions of one dimensional heat and wave equations and Laplace equation.

Complex variables:Analytic functions, Cauchy's integral theorem, Taylor and Laurent series, Residue theorem.

Probability and Statistics: Definitions of probability and sampling theorems, Conditional probability, Mean, median, mode and standard deviation, Random variables, Poisson, Normal and Binomial distributions.

Numerical Methods: Numerical solutions of linear and non-linear algebraic equations Integration by trapezoidal and Simpson's rule, single and multi-step methods for differential equations.
Chemical Engineering

Process Calculations and Thermodynamics: Laws of conservation of mass and energy; use of tie components; recycle, bypass and purge calculations; degree of freedom analysis. First and Second laws of thermodynamics. First law application to close and open systems. Second law and Entropy Thermodynamic properties of pure substances: equation of state and departure function, properties of mixtures: partial molar properties, fugacity, excess properties and activity coefficients; phase equilibria: predicting VLE of systems; chemical reaction equilibria.

Fluid Mechanics and Mechanical Operations: Fluid statics, Newtonian and non-Newtonian fluids, Bernoulli equation, Macroscopic friction factors, energy balance, dimensional analysis, shell balances, flow through pipeline systems, flow meters, pumps and compressors, packed and fluidized beds, elementary boundary layer theory, size reduction and size separation; free and hindered settling; centrifuge and cyclones; thickening and classification, filtration, mixing and agitation; conveying of solids.

Heat Transfer: Conduction, convection and radiation, heat transfer coefficients, steady and unsteady heat conduction, boiling, condensation and evaporation; types of heat exchangers and evaporators and their design.

Mass Transfer: Fick's laws, molecular diffusion in fluids, mass transfer coefficients, film, penetration and surface renewal theories; momentum, heat and mass transfer analogies; stagewise and continuous contacting and stage efficiencies; HTU & NTU concepts design and operation of equipment for distillation, absorption, leaching, liquid-liquid extraction, drying, humidification, dehumidification and adsorption.

Chemical Reaction Engineering: Theories of reaction rates; kinetics of homogeneous reactions, interpretation of kinetic data, single and multiple reactions in ideal reactors, non-ideal reactors; residence time distribution, single parameter model; non-isothermal reactors; kinetics of heterogeneous catalytic reactions; diffusion effects in catalysis.

Instrumentation and Process Control: Measurement of process variables; sensors, transducers and their dynamics, transfer functions and dynamic responses of simple systems, process reaction curve, controller modes (P, PI, and PID); control valves; analysis of closed loop systems including stability, frequency response and controller tuning, cascade, feed forward control.

Plant Design and Economics: Process design and sizing of chemical engineering equipment such as compressors, heat exchangers, multistage contactors; principles of process economics and cost estimation including total annualized cost, cost indexes, rate of return, payback period, discounted cash flow, optimization in design.

Chemical Technology: Inorganic chemical industries; sulfuric acid, NaOH, fertilizers (Ammonia, Urea, SSP and TSP); natural products industries (Pulp and Paper, Sugar, Oil, and Fats); petroleum refining and petrochemicals; polymerization industries; polyethylene, polypropylene, PVC and polyester synthetic fibers.


GATE Syllabus for Computer Science & Information Technology - CSEngineering Mathematics

Mathematical Logic: Propositional Logic; First Order Logic.

Probability: Conditional Probability; Mean, Median, Mode and Standard Deviation; Random Variables; Distributions; uniform, normal, exponential, Poisson, Binomial.

Set Theory & Algebra: Sets; Relations; Functions; Groups; Partial Orders; Lattice; Boolean Algebra.

Combinatorics: Permutations; Combinations; Counting; Summation; generating functions;

recurrence relations; asymptotics.

Graph Theory: Connectivity; spanning trees; Cut vertices & edges; covering; matching; independent sets; Colouring; Planarity; Isomorphism.

Linear Algebra: Algebra of matrices, determinants, systems of linear equations, Eigen values and Eigen vectors.

Numerical Methods: LU decomposition for systems of linear equations; numerical solutions of non-linear algebraic equations by Secant, Bisection and Newton-Raphson Methods; Numerical integration by trapezoidal and Simpson's rules.

Calculus: Limit, Continuity & differentiability, Mean value Theorems, Theorems of integral calculus, evaluation of definite & improper integrals, Partial derivatives, Total derivatives, maxima & minima.

Computer Science and Information Technology

Digital Logic: Logic functions, Minimization, Design and synthesis of combinational and sequential circuits; Number representation and computer arithmetic (fixed and floating point).

Computer Organization and Architecture: Machine instructions and addressing modes, ALU and data-path, CPU control design, Memory interface, I/O interface (Interrupt and DMA mode), Instruction pipelining, Cache and main memory, Secondary storage.

Programming and Data Structures: Programming in C; Functions, Recursion, Parameter passing, Scope, Binding; Abstract data types, Arrays, Stacks, Queues, Linked Lists, Trees, Binary search trees, Binary heaps.

Algorithms: Analysis, Asymptotic notation, Notions of space and time complexity, Worst and average case analysis; Design: Greedy approach, Dynamic programming, Divide-and-conquer; Tree and graph traversals, Connected components, Spanning trees, Shortest paths; Hashing, Sorting, Searching. Asymptotic analysis (best, worst, average cases) of time and space, upper and lower bounds, Basic concepts of complexity classes P, NP, NP-hard, NP-complete.

Theory of Computation: Regular languages and finite automata, Context free languages and Push-down automata, Recursively enumerable sets and Turing machines, Undecidability.

Compiler Design: Lexical analysis, Parsing, Syntax directed translation, Runtime environments, Intermediate and target code generation, Basics of code optimization.

Operating System: Processes, Threads, Inter-process communication, Concurrency, Synchronization, Deadlock, CPU scheduling, Memory management and virtual memory, File systems, I/O systems, Protection and security.

Databases: ER-model, Relational model (relational algebra, tuple calculus), Database design (integrity constraints, normal forms), Query languages (SQL), File structures (sequential files, indexing, B and B+ trees), Transactions and concurrency control.

Information Systems and Software Engineering: information gathering, requirement and feasibility analysis, data flow diagrams, process specifications, input/output design, process life cycle, planning and managing the project, design, coding, testing, implementation, maintenance.

Computer Networks: ISO/OSI stack, LAN technologies (Ethernet, Token ring), Flow and error control techniques, Routing algorithms, Congestion control, TCP/UDP and sockets, IP(v4), Application layer protocols (icmp, dns, smtp, pop, ftp, http); Basic concepts of hubs, switches, gateways, and routers. Network security basic concepts of public key and private key cryptography, digital signature, firewalls.

Web technologies: HTML, XML, basic concepts of client-server computing.


GATE Syllabus for Chemistry - CY

Physical Chemistry

Structure: Quantum theory: principles and techniques; applications to a particle in a box, harmonic oscillator, rigid rotor and hydrogen atom; valence bond and molecular orbital theories, Hückel approximation; approximate techniques: variation and perturbation; symmetry, point groups; rotational, vibrational, electronic, NMR, and ESR spectroscopy

Equilibrium: Kinetic theory of gases; First law of thermodynamics, heat, energy, and work; second law of thermodynamics and entropy; third law and absolute entropy; free energy; partial molar quantities; ideal and non-ideal solutions; phase transformation: phase rule and phase diagrams - one, two, and three component systems; activity, activity coefficient, fugacity, and fugacity coefficient; chemical equilibrium, response of chemical equilibrium to temperature and pressure; colligative properties; Debye-Hückel theory; thermodynamics of electrochemical cells; standard electrode potentials: applications - corrosion and energy conversion; molecular partition function (translational, rotational, vibrational, and electronic).

Kinetics: Rates of chemical reactions, temperature dependence of chemical reactions; elementary, consecutive, and parallel reactions; steady state approximation; theories of reaction rates - collision and transition state theory, relaxation kinetics, kinetics of photochemical reactions and free radical polymerization, homogeneous catalysis, adsorption isotherms and heterogeneous catalysis.
Inorganic Chemistry

Main group elements: General characteristics, allotropes, structure and reactions of simple and industrially important compounds: boranes, carboranes, silicones, silicates, boron nitride, borazines and phosphazenes. Hydrides, oxides and oxoacids of pnictogens (N, P), chalcogens (S, Se & Te) and halogens, xenon compounds, pseudo halogens and interhalogen compounds. Shapes of molecules and hard- soft acid base concept. Structure and Bonding (VBT) of B, Al, Si, N, P, S, Cl compounds. Allotropes of carbon: graphite, diamond, C60. Synthesis and reactivity of inorganic polymers of Si and P.

Transition Elements: General characteristics of d and f block elements; coordination chemistry: structure and isomerism, stability, theories of metal- ligand bonding (CFT and LFT), mechanisms of substitution and electron transfer reactions of coordination complexes. Electronic spectra and magnetic properties of transition metal complexes, lanthanides and actinides. Metal carbonyls, metal- metal bonds and metal atom clusters, metallocenes; transition metal complexes with bonds to hydrogen, alkyls, alkenes and arenes; metal carbenes; use of organometallic compounds as catalysts in organic synthesis. Bioinorganic chemistry of Na, K. Mg, Ca, Fe, Co, Zn, Cu and Mo.

Solids: Crystal systems and lattices, miller planes, crystal packing, crystal defects; Bragg's Law, ionic crystals, band theory, metals and semiconductors, Different structures of AX, AX2, ABX3 compounds, spinels.

Instrumental methods of analysis: Atomic absorption and emission spectroscopy including ICP-AES, UV- visible spectrophotometry, NMR, mass, Mossbauer spectroscopy (Fe and Sn), ESR spectroscopy, chromatography including GC and HPLC and electro-analytical methods (Coulometry, cyclic voltammetry, polarography amperometry, and ion selective electrodes).
Organic Chemistry

Stereochemistry: Chirality of organic molecules with or without chiral centres. Specification of configuration in compounds having one or more stereogenic centres. Enantiotopic and diastereotopic atoms, groups and faces. Stereoselective and stereospecific synthesis. Conformational analysis of acyclic and cyclic compounds. Geometrical isomerism. Configurational and conformational effects on reactivity and selectivity/specificity.

Reaction mechanism: Methods of determining reaction mechanisms. Nucleophilic and electrophilic substitutions and additions to multiple bonds. Elimination reactions. Reactive intermediates- carbocations, carbanions, carbenes, nitrenes, arynes, free radicals. Molecular rearrangements involving electron deficient atoms.

Organic synthesis: Synthesis, reactions, mechanisms and selectivity involving the following- alkenes, alkynes, arenes, alcohols, phenols, aldehydes, ketones, carboxylic acids and their derivatives, halides, nitro compounds and amines. Use of compounds of Mg, Li, Cu, B and Si in organic synthesis. Concepts in multistep synthesis- retrosynthetic analysis, disconnections, synthons, synthetic equivalents, reactivity umpolung, selectivity, protection and deprotection of functional groups.

Pericyclic reactions: Electrocyclic, cycloaddition and sigmatropic reactions. Orbital correlation, FMO and PMO treatments.

Photochemistry: Basic principles. Photochemistry of alkenes, carbonyl compounds, and arenes. Photooxidation and photoreduction. Di-p- methane rearrangement, Barton reaction.

Heterocyclic compounds: Structure, preparation, properties and reactions of furan, pyrrole, thiophene, pyridine, indole and their derivatives.

Biomolecules: Structure, properties and reactions of mono- and di-saccharides, physicochemical properties of amino acids, chemical synthesis of peptides, structural features of proteins, nucleic acids, steroids, terpenoids, carotenoids, and alkaloids.

Spectroscopy: Principles and applications of UV-visible, IR, NMR and Mass spectrometry in the determination of structures of organic molecules.


GATE Syllabus for Electronics and Communication Engineering - EC

Engineering Mathematics

Linear Algebra: Matrix Algebra, Systems of linear equations, Eigen values and eigen vectors.

Calculus: Mean value theorems, Theorems of integral calculus, Evaluation of definite and improper integrals, Partial Derivatives, Maxima and minima, Multiple integrals, Fourier series. Vector identities, Directional derivatives, Line, Surface and Volume integrals, Stokes, Gauss and Green's theorems.

Differential equations: First order equation (linear and nonlinear), Higher order linear differential equations with constant coefficients, Method of variation of parameters, Cauchy's and Euler's equations, Initial and boundary value problems, Partial Differential Equations and variable separable method.

Complex variables: Analytic functions, Cauchy's integral theorem and integral formula, Taylor's and Laurent' series, Residue theorem, solution integrals.

Probability and Statistics: Sampling theorems, Conditional probability, Mean, median, mode and standard deviation, Random variables, Discrete and continuous distributions, Poisson, Normal and Binomial distribution, Correlation and regression analysis.

Numerical Methods: Solutions of non-linear algebraic equations, single and multi-step methods for differential equations.

Transform Theory: Fourier transform, Laplace transform, Z-transform.
Electronics and Communication Engineering

Networks: Network graphs: matrices associated with graphs; incidence, fundamental cut set and fundamental circuit matrices. Solution methods: nodal and mesh analysis. Network theorems: superposition, Thevenin and Norton's maximum power transfer, Wye-Delta transformation. Steady state sinusoidal analysis using phasors. Linear constant coefficient differential equations; time domain analysis of simple RLC circuits, Solution of network equations using Laplace transform: frequency domain analysis of RLC circuits. 2-port network parameters: driving point and transfer functions. State equations for networks.

Electronic Devices: Energy bands in silicon, intrinsic and extrinsic silicon. Carrier transport in silicon: diffusion current, drift current, mobility, and resistivity. Generation and recombination of carriers. p-n junction diode, Zener diode, tunnel diode, BJT, JFET, MOS capacitor, MOSFET, LED, p-I-n and avalanche photo diode, Basics of LASERs. Device technology: integrated circuits fabrication process, oxidation, diffusion, ion implantation, photolithography, n-tub, p-tub and twin-tub CMOS process.

Analog Circuits: Small Signal Equivalent circuits of diodes, BJTs, MOSFETs and analog CMOS. Simple diode circuits, clipping, clamping, rectifier. Biasing and bias stability of transistor and FET amplifiers. Amplifiers: single-and multi-stage, differential and operational, feedback, and power. Frequency response of amplifiers. Simple op-amp circuits. Filters. Sinusoidal oscillators; criterion for oscillation; single-transistor and op-amp configurations. Function generators and wave-shaping circuits, 555 Timers. Power supplies.

Digital circuits: Boolean algebra, minimization of Boolean functions; logic gates; digital IC families (DTL, TTL, ECL, MOS, CMOS). Combinatorial circuits: arithmetic circuits, code converters, multiplexers, decoders, PROMs and PLAs. Sequential circuits: latches and flip-flops, counters and shift-registers. Sample and hold circuits, ADCs, DACs. Semiconductor memories. Microprocessor(8085): architecture, programming, memory and I/O interfacing.

Signals and Systems: Definitions and properties of Laplace transform, continuous-time and discrete-time Fourier series, continuous-time and discrete-time Fourier Transform, DFT and FFT, z-transform. Sampling theorem. Linear Time-Invariant (LTI) Systems: definitions and properties; causality, stability, impulse response, convolution, poles and zeros, parallel and cascade structure, frequency response, group delay, phase delay. Signal transmission through LTI systems.

Control Systems: Basic control system components; block diagrammatic description, reduction of block diagrams. Open loop and closed loop (feedback) systems and stability analysis of these systems. Signal flow graphs and their use in determining transfer functions of systems; transient and steady state analysis of LTI control systems and frequency response. Tools and techniques for LTI control system analysis: root loci, Routh-Hurwitz criterion, Bode and Nyquist plots. Control system compensators: elements of lead and lag compensation, elements of Proportional-Integral-Derivative (PID) control. State variable representation and solution of state equation of LTI control systems.

Communications: Random signals and noise: probability, random variables, probability density function, autocorrelation, power spectral density. Analog communication systems: amplitude and angle modulation and demodulation systems, spectral analysis of these operations, superheterodyne receivers; elements of hardware, realizations of analog communication systems; signal-to-noise ratio (SNR) calculations for amplitude modulation (AM) and frequency modulation (FM) for low noise conditions. Fundamentals of information theory and channel capacity theorem. Digital communication systems: pulse code modulation (PCM), differential pulse code modulation (DPCM), digital modulation schemes: amplitude, phase and frequency shift keying schemes (ASK, PSK, FSK), matched filter receivers, bandwidth consideration and probability of error calculations for these schemes. Basics of TDMA, FDMA and CDMA and GSM.

Electromagnetics: Elements of vector calculus: divergence and curl; Gauss' and Stokes' theorems, Maxwell's equations: differential and integral forms. Wave equation, Poynting vector. Plane waves: propagation through various media; reflection and refraction; phase and group velocity; skin depth. Transmission lines: characteristic impedance; impedance transformation; Smith chart; impedance matching; S parameters, pulse excitation. Waveguides: modes in rectangular waveguides; boundary conditions; cut-off frequencies; dispersion relations. Basics of propagation in dielectric waveguide and optical fibers. Basics of Antennas: Dipole antennas; radiation pattern; antenna gain.

GATE Syllabus for Electrical Engineering - EE

Engineering Mathematics

Linear Algebra: Matrix Algebra, Systems of linear equations, Eigen values and eigen vectors.

Calculus: Mean value theorems, Theorems of integral calculus, Evaluation of definite and improper integrals, Partial Derivatives, Maxima and minima, Multiple integrals, Fourier series. Vector identities, Directional derivatives, Line, Surface and Volume integrals, Stokes, Gauss and Green's theorems.

Differential equations: First order equation (linear and nonlinear), Higher order linear differential equations with constant coefficients, Method of variation of parameters, Cauchy's and Euler's equations, Initial and boundary value problems, Partial Differential Equations and variable separable method.

Complex variables: Analytic functions, Cauchy's integral theorem and integral formula, Taylor's and Laurent' series, Residue theorem, solution integrals.

Probability and Statistics: Sampling theorems, Conditional probability, Mean, median, mode and standard deviation, Random variables, Discrete and continuous distributions, Poisson, Normal and Binomial distribution, Correlation and regression analysis.

Numerical Methods: Solutions of non-linear algebraic equations, single and multi-step methods for differential equations.

Transform Theory: Fourier transform, Laplace transform, Z-transform.


Electrical Engineering

Electric Circuits and Fields: Network graph, KCL, KVL, node and mesh analysis, transient response of dc and ac networks; sinusoidal steady-state analysis, resonance, basic filter concepts; ideal current and voltage sources, Thevenin's, Norton's and Superposition and Maximum Power Transfer theorems, two-port networks, three phase circuits; Gauss Theorem, electric field and potential due to point, line, plane and spherical charge distributions; Ampere's and Biot-Savart's laws; inductance; dielectrics; capacitance.

Signals and Systems: Representation of continuous and discrete-time signals; shifting and scaling operations; linear, time-invariant and causal systems; Fourier series representation of continuous periodic signals; sampling theorem; Fourier, Laplace and Z transforms.

Electrical Machines: Single phase transformer - equivalent circuit, phasor diagram, tests, regulation and efficiency; three phase transformers - connections, parallel operation; auto-transformer; energy conversion principles; DC machines - types, windings, generator characteristics, armature reaction and commutation, starting and speed control of motors; three phase induction motors - principles, types, performance characteristics, starting and speed control; single phase induction motors; synchronous machines - performance, regulation and parallel operation of generators, motor starting, characteristics and applications; servo and stepper motors.

Power Systems: Basic power generation concepts; transmission line models and performance; cable performance, insulation; corona and radio interference; distribution systems; per-unit quantities; bus impedance and admittance matrices; load flow; voltage control; power factor correction; economic operation; symmetrical components; fault analysis; principles of over-current, differential and distance protection; solid state relays and digital protection; circuit breakers; system stability concepts, swing curves and equal area criterion; HVDC transmission and FACTS concepts.

Control Systems: Principles of feedback; transfer function; block diagrams; steady-state errors; Routh and Niquist techniques; Bode plots; root loci; lag, lead and lead-lag compensation; state space model; state transition matrix, controllability and observability.

Electrical and Electronic Measurements: Bridges and potentiometers; PMMC, moving iron, dynamometer and induction type instruments; measurement of voltage, current, power, energy and power factor; instrument transformers; digital voltmeters and multimeters; phase, time and frequency measurement; Q-meters; oscilloscopes; potentiometric recorders; error analysis.

Analog and Digital Electronics: Characteristics of diodes, BJT, FET; amplifiers - biasing, equivalent circuit and frequency response; oscillators and feedback amplifiers; operational amplifiers - characteristics and applications; simple active filters; VCOs and timers; combinational and sequential logic circuits; multiplexer; Schmitt trigger; multi-vibrators; sample and hold circuits; A/D and D/A converters; 8-bit microprocessor basics, architecture, programming and interfacing.

Power Electronics and Drives: Semiconductor power diodes, transistors, thyristors, triacs, GTOs, MOSFETs and IGBTs - static characteristics and principles of operation; triggering circuits; phase control rectifiers; bridge converters - fully controlled and half controlled; principles of choppers and inverters; basis concepts of adjustable speed dc and ac drives.


GATE Syllabus for Geology and Geophysics - GG

Part A: Common to Geology and Geophysics

Earth and Planetary system, size, shape, internal structure and composition of the earth; atmosphere and greenhouse effect; isostasy; elements of seismology; physical properties of the interior of the earth; continents and continental processes; physical oceanography; geomagnetism and paleomagnetism, continental drift, plate tectonics.

Weathering; soil formation; action of river, wind, glacier and ocean; earthquakes, volcanism and orogeny. Basic structural geology, mineralogy and petrology. Geological time scale and geochronology; stratigraphic principles; major stratigraphic divisions of India. Engineering properties of rocks and soils. Ground water geology. Geological and geographical distribution of ore, coal and petroleum resources of India.

Introduction to remote sensing. Physical basis and applications of gravity, magnetic, electrical, electromagnetic, seismic and radiometric prospecting for oil, mineral and ground water; introductory well logging.
Part B - Section 1: Geology

Crystal symmetry, forms, twinning; crystal chemistry; optical mineralogy, classification of minerals, diagnostic physical and optical properties of rock forming minerals.

Igneous rocks - classification, forms and textures, magmatic differentiation; phase diagrams and trace elements as monitors of magma evolutionary processes; mantle melting models and derivation and primary magmas. Metamorphism; controlling factors, metamorphic facies, grade and basic types; metamorphism of pelitic, mafic and impure carbonate rocks; role of fluids in metamorphism; metamorphic P-T-t paths and their tectonic significance; Igneous and metamorphic provinces of India; structure and petrology of sedimentary rocks; sedimentary processes and environments, sedimentary facies, basin analysis; association of igneous, sedimentary and metamorphic rocks with tectonic setting.

Stress, strain and material response; brittle and ductile deformation; primary and secondary structures; geometry and genesis of folds, faults, joints, unconformities; cleavage, schistosity and lineation; methods of projection, tectonites and their significance; shear zone; superposed folding; basement cover relationship.

Morphology, classification and geological significance of important invertebrates, vertebrates, microfossils and palaeoflora; stratigraphic principles and Indian stratigraphy.

Geomorphic processes and agents; development and evolution of landforms; slope and drainage; processes on deep oceanic and near-shore regions; quantitative and applied geomorphology.

Ore mineralogy and optical properties of ore minerals; ore forming processes vis-à-vis ore-rock association (magmatic, hydrothermal, sedimentary and metamorphogenic ores); ores and metamorphism; fluid inclusions as an ore genetic tool; prospecting and exploration of economic minerals; sampling, ore reserve estimation, geostatistics, mining methods. Coal and petroleum geology; origin and distribution of mineral and fuel deposits in India; marine geology and ocean resources; ore dressing and mineral economics.

Cosmic abundance; meteorites; geochemical evolution of the earth; geochemical cycles; distribution of major, minor and trace elements; elements of geochemical thermodynamics, isotope geochemistry; geochemistry of waters including solution equilibria and water rock interaction.

Engineering properties of rocks and soils; rocks as construction materials; role of geology in the construction of engineering structures including dams, tunnels and excavation sites; natural hazards. Ground water geology - exploration, well hydraulics and water quality. Basic principles of remote sensing - energy sources and radiation principles, atmospheric absorption, interaction of energy with earth's surface, air-photo interpretation, multispectral remote sensing in visible, infrared, thermal IR and microwave regions, digital processing of satellite images. GIS - basic concepts, raster and vector mode operation.



Part B - Section 2: Geophysics

The earth as a planet; different motions of the earth; gravity field of the earth, Clairaut's theorem, size and shape of earth; geochronology; seismology and interior of the earth; variation of density, velocity, pressure, temperature, electrical and magnetic properties of the earth; earthquakes-causes and measurements, magnitude and intensity, focal mechanisms, earthquake quantification, source characteristics, seismotectonics and seismic hazards; digital seismographs, geomagnetic field, paleomagnetism; oceanic and continental lithosphere; plate tectonics; heat flow; upper and lower atmospheric phenomena.

Scalar and vector potential fields; Laplace, Maxwell and Helmholtz equations for solution of different types of boundary value problems in Cartesian, cylindrical and spherical polar coordinates; Green's theorem; Image theory; integral equations in potential theory; Eikonal equation and Ray theory. Basic concepts of forward and inverse problems of geophysics, Ill-posedness of inverse problems.

‘G’ and ‘g’ units of measurement, absolute and relative gravity measurements; Land, airborne, shipborne and bore-hole gravity surveys; various corrections in gravity data reduction - free air, Bouguer and isostatic anomalies; density estimates of rocks; regional and residual gravity separation; principle of equivalent stratum; upward and downward continuation; wavelength filtering; preparation and analysis of gravity maps; gravity anomalies and their interpretation - anomalies due to geometrical and irregular shaped bodies, depth rules, calculation of mass.

Earth's magnetic field - elements, origin and units of measurement, magnetic susceptibility of rocks and measurements, magnetometers, Land, airborne and marine magnetic surveys, corrections, preparation of magnetic maps, upward and downward continuation, magnetic anomalies-geometrical shaped bodies, depth estimates, Image processing concepts in processing of magnetic anomaly maps; Interpretation of processed magnetic anomaly data.

Conduction of electricity through rocks, electrical conductivities of metals, non-metals, rock forming minerals and different rocks, concepts of D.C. resistivity measurement, various electrode configurations for resistivity sounding and profiling, application of filter theory, Type-curves over multi-layered structures, Dar-Zarrouck parameters, reduction of layers, coefficient of anisotropy, interpretation of resistivity field data, equivalence and suppression, self potential and its origin, field measurement, Induced polarization, time and frequency domain IP measurements; interpretation and applications of IP, ground-water exploration, environmental and engineering applications.

Basic concept of EM induction, Origin of electromagnetic field, elliptic polarization, methods of measurement for different source-receiver configuration, components in EM measurements. Skin-depth, interpretation and applications; earth's natural electromagnetic field, tellurics, magneto-tellurics; geomagnetic depth sounding principles, electromagnetic profiling, methods of measurement, processing of data and interpretation. Geological applications including groundwater, mining and hydrocarbon exploration.

Seismic methods of prospecting; Elastic properties of earth materials; Reflection, refraction and CDP surveys; land and marine seismic sources, generation and propagation of elastic waves, velocity - depth models, geophones, hydrophones, recording instruments (DFS), digital formats, field layouts, seismic noises and noise profile analysis, optimum geophone grouping, noise cancellation by shot and geophone arrays, 2D and 3D seismic data acquisition, processing and interpretation; CDP stacking charts, binning, filtering, dip-moveout, static and dynamic corrections, Digital seismic data processing, seismic deconvolution and migration methods, attribute analysis, bright and dim spots, seismic stratigraphy, high resolution seismics, VSP, AVO. Reservoir geophysics.

Geophysical signal processing, sampling theorem, aliasing, Nyquist frequency, Fourier series, periodic waveform, Fourier and Hilbert transform, Z-transform and wavelet transform; power spectrum, delta function, auto correlation, cross correlation, convolution, deconvolution, principles of digital filters, windows, poles and zeros.

Principles and techniques of geophysical well-logging. SP, resistivity, induction, gamma ray, neutron, density, sonic, temperature, dip meter, caliper, nuclear magnetic, cement bond logging, micro-logs. Quantitative evaluation of formations from well logs; well hydraulics and application of geophysical methods for groundwater study; application of bore hole geophysics in ground water, mineral and oil exploration.

Radioactive methods of prospecting and assaying of minerals (radioactive and non radioactive) deposits, half-life, decay constant, radioactive equilibrium, G M counter, scintillation detector, semiconductor devices, application of radiometric for exploration and radioactive waste disposal.

Geophysical inverse problems; non-uniqueness and stability of solutions; quasi-linear and non-linear methods including Tikhonov's regularization method, Backus-Gilbert method, simulated annealing, genetic algorithms and artificial neural network.


GATE Syllabus for Instrumentation Engineering - IN

ENGINEERING MATHEMATICS

Linear Algebra: Matrix Algebra, Systems of linear equations, Eigen values and eigen vectors.

Calculus: Mean value theorems, Theorems of integral calculus, Evaluation of definite and improper integrals, Partial Derivatives, Maxima and minima, Multiple integrals, Fourier series. Vector identities, Directional derivatives, Line, Surface and Volume integrals, Stokes, Gauss and Green’s theorems.

Differential equations: First order equation (linear and nonlinear), Higher order linear differential equations with constant coefficients, Method of variation of parameters, Cauchy’s and Euler’s equations, Initial and boundary value problems, Partial Differential Equations and variable separable method.

Complex variables: Analytic functions, Cauchy’s integral theorem and integral formula, Taylor’s and Laurent’ series, Residue theorem, solution integrals.

Probability and Statistics: Sampling theorems, Conditional probability, Mean, median, mode and standard deviation, Random variables, Discrete and continuous distributions, Poisson, Normal and Binomial distribution, Correlation and regression analysis.

Numerical Methods: Solutions of non-linear algebraic equations, single and multi-step methods for differential equations.

Transform Theory: Fourier transform, Laplace transform, Z-transform.




INSTRUMENTATION ENGINEERING

Basics of Circuits and Measurement Systems: Kirchoff’s laws, mesh and nodal Analysis. Circuit theorems. One-port and two-port Network Functions. Static and dynamic characteristics of Measurement Systems. Error and uncertainty analysis. Statistical analysis of data and curve fitting.

Transducers, Mechanical Measurement and Industrial Instrumentation: Resistive, Capacitive, Inductive and piezoelectric transducers and their signal conditioning. Measurement of displacement, velocity and acceleration (translational and rotational), force, torque, vibration and shock. Measurement of pressure, flow, temperature and liquid level. Measurement of pH, conductivity, viscosity and humidity.

Analog Electronics: Characteristics of diode, BJT, JFET and MOSFET. Diode circuits. Transistors at low and high frequencies, Amplifiers, single and multi-stage. Feedback amplifiers. Operational amplifiers, characteristics and circuit configurations. Instrumentation amplifier. Precision rectifier. V-to-I and I-to-V converter. Op-Amp based active filters. Oscillators and signal generators.

Digital Electronics: Combinational logic circuits, minimization of Boolean functions. IC families, TTL, MOS and CMOS. Arithmetic circuits. Comparators, Schmitt trigger, timers and mono-stable multi-vibrator. Sequential circuits, flip-flops,
Reply

#2
thanks for this information
Reply



Possibly Related Threads…
Thread Author Replies Views Last Post
  GATE 2017 Solved question papers- All subjects GATE-2018 44 63,702 08-30-2019, 11:14 AM
Last Post: joshyjoy
  GATE 2014 - Previous year papers with answer key - All subjects gateman 31 26,705 08-30-2019, 11:14 AM
Last Post: joshyjoy
  GATE 2013- Question papers and answer key of all subjects gateman 23 20,594 08-30-2019, 11:13 AM
Last Post: joshyjoy
  GATE 2020 All Subjects Syllabus kalyanasundari 31 16,421 08-28-2019, 12:07 PM
Last Post: deepa12
  GATE 2018- Revised and updated Syllabus of all branches gateman 8 9,299 09-13-2015, 12:20 AM
Last Post: luzybabu
  GATE 2011 Syllabus of All subjects and Combinations bijumk 1 7,683 11-10-2013, 01:08 PM
Last Post: selviramalingam
  EC gate syllabus 2014 Chandra Lekha 0 3,867 06-05-2013, 06:15 PM
Last Post: Chandra Lekha
  GATE 2013 syllabus for all subjects download nitinps 10 55,177 02-03-2013, 01:34 PM
Last Post: riya_sinha2010@yahoo.com
  GATE Syllabus for EE - Electrical Engineering abhilash 2 6,685 12-10-2012, 12:22 PM
Last Post: Guest
  GATE 2013 offline examination subjects Amal Manas 2 5,540 08-13-2012, 04:40 PM
Last Post: Guest



Users browsing this thread:
1 Guest(s)

Powered By MyBB, © 2002-2024 Melroy van den Berg.